SAI5
Hardened racks - ground finish - straight
High-precision racks in C45 steel for precise, dynamic applications. SAI5 is ground to the DIN 5 precision class. Teeth are induction-hardened so your application does not lose precision with time. Sides are not heat-treated, in case you need to drill or machine them.
- Steel
- C45
- Heat Treatment
- Induction hardening
- Surface hardness
- 50 -55 HRC
- Precision class
- DIN 5
- Teeth
- Ground
- Sides
- Ground
- Bottom
- Ground
Straight teeth, pressure angle 20°
All racks are available with holes (H1 in the table below) or without holes (H0)
(1) Module / (2) Number of teeth / (3) H = Number of holes / (4) CPE = Cumulative Pitch Error on 300mm
Contact us if you can't find the right drawing
Filter results
Reset
|
Reference
|
M(1)
|
L
|
Z(2)
|
A
|
B
|
B0
|
C
|
D
|
H(3)
|
B1
|
G1
|
G2
|
F
|
C0
|
E
|
G3
|
CPE(4)
|
2D | 3D |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M2-SAI5-1000-H1 | 2 | 1005.3 | 160 | 24 | 24 | 22 | 62.8 | 125.66 | 8 | 8 | 7 | 11 | 7 | 31.3 | 942.7 | 5.7 | - | STEP | |
| M2-SAI5-2000-H1 | 2 | 2010.62 | 320 | 24 | 24 | 22 | 62.8 | 125.66 | 16 | 8 | 7 | 11 | 7 | 31.3 | 1948 | 5.7 | - | STEP | |
| M3-SAI5-1000-H1 | 3 | 1017.9 | 108 | 29 | 29 | 26 | 63.6 | 127.23 | 8 | 9 | 10 | 15 | 9 | 34.4 | 949.1 | 7.7 | - | STEP | |
| M3-SAI5-2000-H1 | 3 | 2035.75 | 216 | 29 | 29 | 26 | 63.6 | 127.23 | 16 | 9 | 10 | 15 | 9 | 34.4 | 1967 | 7.7 | - | STEP | |
| M4-SAI5-1000-H1 | 4 | 1005.3 | 80 | 39 | 39 | 35 | 62.8 | 125.66 | 8 | 12 | 10 | 15 | 9 | 37.5 | 930.3 | 7.7 | - | STEP | |
| M4-SAI5-1500-H1 | 4 | 1507.9 | 120 | 39 | 39 | 35 | 62.8 | 125.66 | 12 | 12 | 10 | 15 | 9 | 37.5 | 1432.9 | 7.7 | - | STEP | |
| M4-SAI5-2000-H1 | 4 | 2010.62 | 160 | 39 | 39 | 35 | 62.8 | 125.66 | 16 | 12 | 10 | 15 | 9 | 37.5 | 1935.6 | 7.7 | - | STEP | |
| M5-SAI5-1000-H1 | 5 | 1005.3 | 64 | 49 | 39 | 34 | 62.8 | 125.66 | 8 | 12 | 14 | 20 | 13 | 30.1 | 945 | 11.7 | - | STEP | |
| M5-SAI5-1500-H1 | 5 | 1507.96 | 96 | 49 | 39 | 34 | 62.8 | 125.66 | 12 | 12 | 14 | 20 | 13 | 30.1 | 1447.7 | 11.7 | - | STEP | |
| M5-SAI5-2000-H1 | 5 | 2010.62 | 128 | 49 | 39 | 34 | 62.8 | 125.66 | 16 | 12 | 14 | 20 | 13 | 30.1 | 1950.4 | 11.7 | - | STEP | |
| M5-SAI5-500-H1 | 5 | 502.6 | 32 | 49 | 39 | 34 | 62.8 | 125.66 | 4 | 12 | 14 | 20 | 13 | 30.1 | 442.4 | 11.7 | - | STEP | |
| M6-SAI5-1000-H1 | 6 | 1017.88 | 54 | 59 | 49 | 43 | 63.6 | 127.23 | 8 | 16 | 18 | 26 | 17 | 31.4 | 955 | 15.7 | - | STEP | |
| M6-SAI5-1500-H1 | 6 | 1526.81 | 81 | 59 | 49 | 43 | 63.6 | 127.23 | 12 | 16 | 18 | 26 | 17 | 31.4 | 1464 | 15.7 | - | STEP | |
| M6-SAI5-2000-H1 | 6 | 2035.75 | 108 | 59 | 49 | 43 | 63.6 | 127.23 | 16 | 16 | 18 | 26 | 17 | 31.4 | 1973 | 15.7 | - | STEP | |
| M6-SAI5-500-H1 | 6 | 508.9 | 27 | 59 | 49 | 43 | 63.6 | 127.23 | 4 | 16 | 18 | 26 | 17 | 31.4 | 446.1 | 15.7 | - | STEP | |
| M8-SAI5-1000-H1 | 8 | 1005.3 | 40 | 79 | 79 | 71 | 62.8 | 125.66 | 8 | 25 | 22 | 33 | 21 | 26.6 | 952 | 19.7 | - | STEP | |
| M8-SAI5-2000-H1 | 8 | 2010.61 | 80 | 79 | 79 | 71 | 62.8 | 125.66 | 16 | 25 | 22 | 33 | 21 | 26.6 | 1957.3 | 19.7 | - | STEP | |
| M8-SAI5-500-H1 | 8 | 502.65 | 20 | 79 | 79 | 71 | 62.8 | 125.66 | 4 | 25 | 22 | 33 | 21 | 26.6 | 449.45 | 19.7 | - | STEP |