SAI10
Hardened racks - cut finish - straight
Racks in C45 steel for dynamic applications. Teeth are induction-hardened to maximize lifespan. Sides are not heat-treated, in case you need to drill or machine them. SAI10 racks are coated with a black oxide anticorrosive layer.
- Çelik
- C45
- Isıl işlem
- Induction hardening
- Yüzey sertliği
- 50 HRC
- Hassasiyet sınıfı
- Q10
- Dişli
- Cut
- Kenarlar
- Milled
- Alt
- Milled
Straight teeth, pressure angle 20°
All racks are available with holes (H1 in the table below) or without holes (H0)
(1) Module / (2) Number of teeth / (3) H = Number of holes / (4) CPE = Cumulative Pitch Error on 300mm
Doğru planı bulamazsanız bizimle iletişime geçin
Sonuçları filtrele
Sıfırla
|
Referans
|
M(1)
|
L
|
Z(2)
|
A
|
B
|
B0
|
C
|
D
|
H(3)
|
B1
|
G1
|
G2
|
F
|
C0
|
E
|
G3
|
CPE(4)
|
2D | 3D |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M2-SAI10-1000-H1 | 2 | 1005.31 | 160 | 25 | 24 | 22 | 62.83 | 125.66 | 8 | 8 | 7 | 11 | 7 | 31.3 | 942.7 | 5.7 | 0.086 | STEP | |
| M3-SAI10-1000-H1 | 3 | 1017.88 | 108 | 30 | 29 | 26 | 63.62 | 127.23 | 8 | 9 | 10 | 15 | 9 | 34.4 | 949.1 | 7.7 | 0.091 | STEP | |
| M4-SAI10-1000-H1 | 4 | 1005.31 | 80 | 40 | 39 | 35 | 62.83 | 125.66 | 8 | 12 | 10 | 15 | 9 | 37.5 | 930.3 | 7.7 | 0.095 | STEP | |
| M5-SAI10-1000-H1 | 5 | 1005.31 | 64 | 50 | 39 | 34 | 62.83 | 125.66 | 8 | 12 | 14 | 20 | 13 | 30.2 | 945 | 11.7 | 0.098 | STEP | |
| M6-SAI10-1000-H1 | 6 | 1017.88 | 54 | 60 | 49 | 43 | 63.62 | 127.23 | 8 | 16 | 18 | 26 | 17 | 31.4 | 955 | 15.7 | 0.1 | STEP |