Precision rack DIN 9 C45

DIN 9 - C45 - Straight teeth

 

PRECISION RACKS FOR CONTINUOUS MOUNTING

 

Straight teeth

Teeth cut to DIN 9h25, pressure angle 20°

Sides and bottom milled (Ra=1.6)

Material : C45

 Precision spur ground rack

Reference M(1) L Z(2) A B B0 C D H(3) B1 G1 G2 F C0 E G3

CPE(4)

M1.5-S-C45-DIN9-500-H1 1.5 499.51 106 17 17 15.5 62.44 124.88 4 8 6 9.5 7 29.0 441.5 5.7 0.042
M1.5-S-C45-DIN9-1000-H1 1.5 999.03 212 17 17 15.5 62.44 124.88 8 8 6 9.5 7 29.0 941.0 5.7 0.042
M2-S-C45-DIN9-500-H1 2 502.64 80 24 24 22 62.83 125.66 4 8 7 11 7 31.3 440.1 5.7 0.044
M2-S-C45-DIN9-1000-H1 2 1005.28 160 24 24 22 62.83 125.66 8 8 7 11 7 31.3 942.7 5.7 0.044
M3-S-C45-DIN9-500-H1 3 508.95 54 29 29 26 63.62 127.23 4 9 10 15 9 34.4 440.1 7.7 0.046
M3-S-C45-DIN9-1000-H1 3 1017.9 108 29 29 26 63.62 127.23 8 9 10 15 9 34.4 949.9 7.7 0.046
M4-S-C45-DIN9-500-H1 4 502.64 40 39 39 35 62.83 125.66 4 12 10 15 9 37.5 427.7 7.7 0.048
M4-S-C45-DIN9-1000-H1 4 1005.28 80 39 39 35 62.83 125.66 8 12 10 15 9 37.5 930.3 7.7 0.048
M5-S-C45-DIN9-500-H1 5 502.65 32 49 39 34 62.83 125.66 4 12 14 20 13 30.1 442.4 11.7 0.050
M5-S-C45-DIN9-1000-H1 5 1005.31 64 49 39 34 62.83 125.66 8 12 14 20 13 30.1 945 11.7 0.050
M6-S-C45-DIN9-500-H1 6 508.95 27 59 49 43 63.62 127.23 4 16 18 26 17 31.4 446.1 15.7 0.055
M6-S-C45-DIN9-1000-H1 6 1017.9 54 59 49 43 63.62 127.23 8 16 18 26 17 31.4 955.0 15.7 0.055
M8-S-C45-DIN9-500-H1 8 502.64 20 79 79 71 62.83 125.66 4 25 22 33 21 26.6 449.5 19.7 0.060
M8-S-C45-DIN9-1000-H1 8 1005.28 40 79 79 71 62.83 125.66 8 25 22 33 21 26.6 952 19.7 0.060

All dimensions are mm. Other sizes and modules available upon request. 2D/3D Drawings available upon request

Each model can be purchased with or without holes. Just replace "H1" in the reference by "H0".

(1) : M = Module / (2) : Z = Number of teeth / (3) : H = Number of holes / (4) : CPE = Cumulative Pitch Error on 300mm

Related products

©RECKON DRIVES INTERNATIONAL 2016

Contact us by e-mail only