Precision rack DIN 9 C45

DIN 9 - C45 - Helical teeth

 

PRECISION RACKS FOR CONTINUOUS MOUNTING

 

Helical teeth (right-hand, 19°31'42")

Teeth ground to DIN 9h27, pressure angle 20°

Sides and bottom milled (Ra=1.6)

Material : C45

With holes

 

Reference M(1) L L2 Z(2) A B B0 C D H(3) B1 G1 G2 F C0 E G3

CPE(4)

M1.5-H-C45-ISO9-500-H1 1.5 500.00 6 100 17 17 15.5 62.50 125 4 8 6 9.5 7 31.7 436.6 5.7 0.042
M1.5-H-C45-ISO9-1000-H1 1.5 1000.00 6 200 17 17 15.5 62.50 125 8 8 6 9.5 7 31.7 936.6 5.7 0.042
M2-H-C45-ISO9-500-H1 2 500.00 8.5 75 24 24 22 62.50 125 4 8 7 11 7 31.7 426.6 5.7 0.044
M2-H-C45-ISO9-1000-H1 2 1000.00 8.5 150 24 24 22 62.50 125 8 8 7 11 7 31.7 936.6 5.7 0.044
M3-H-C45-ISO9-500-H1 3 500.00 10.3 50 29 29 26 62.50 125 4 9 10 15 9 35.0 430.0 7.7 0.046
M3-H-C45-ISO9-1000-H1 3 1000.00 10.3 100 29 29 26 62.50 125 8 9 10 15 9 35.0 930.0 7.7 0.046
M4-H-C45-ISO9-500-H1 4 506.67 13.8 38 39 39 35 62.50 125 4 12 10 15 9 33.3 433.0 7.7 0.048
M4-H-C45-ISO9-1000-H1 4 1000.00 13.8 75 39 39 35 62.50 125 8 12 10 15 9 33.3 933.4 7.7 0.048
M5-H-C45-ISO9-500-H1 5 500.00 17.4 30 49 39 34 62.50 125 4 12 14 20 13 37.5 425.0 11.7 0.050
M5-H-C45-ISO9-1000-H1 5 1000.00 17.4 60 49 39 34 62.50 125 8 12 14 20 13 37.5 925.0 11.7 0.050
M6-H-C45-ISO9-500-H1 6 500.00 20.9 25 59 49 43 62.50 125 4 16 18 26 17 37.5 425.0 15.7 0.055
M6-H-C45-ISO9-1000-H1 6 1000 20.9 50 59 49 43 62.50 125 8 16 18 26 17 37.5 925.0 15.7 0.055
M8-H-C45-ISO9-500-H1 8 480.00 28.0 18 79 79 71 60.00 120 4 25 22 33 21 120.0 240.0 17.7 0.060
M8-H-C45-ISO9-1000-H1 8 960.00 28.0 36 79 79 71 60.00 120 8 25 22 33 21 120.0 720.0 17.7 0.060

All dimensions are mm. Other sizes, modules and helix angles available upon request. 2D/3D Drawings available @ contact@reckondrives.com.

(1) : M = Module / (2) : Z = Number of teeth / (3) : H = Number of holes / (4) : CPE = Cumulative Pitch Error on 300mm

Related products

©RECKON DRIVES INTERNATIONAL 2016

Contact us by e-mail only